Dents can not only be visually unattractive, they can also be expensive. Dents can be large or small, and could result from bumping into something or hitting it. That’s why owners usually need to have their vehicle(s), including any damage that has been caused by collision with another vehicle, taken to a professional for repairs. Let’s look at some DIY alternatives to fix that small issue at home. After all, nobody would like to foot a huge cost for a small mistake they made in driving around town.
How to Repair Car Dents
Provided below are some methods to take care of small scratches and dents to your car.
1. Just paint it up
You can repair the damage with just one coat paint. However, if the dent is larger than that, you’ll need to smooth out any scratches or rust. Then, apply pressure sensitive primer to the whip , and then allow it to dry for 24 hours. As long as there’s not a structurally incorrect, like rusting metal supports under an inch into concrete walls we recommend simply painting over these areas so they aren’t visible against normally smooth surfaces.
2. Use A Rubber Plunger
An elastic plunger is best to create a ding in the middle of the ring that doesn’t have any creases. It is important to first dampen the edges of your tool with water prior to pushing them downwards to produce suction. This makes them more flexible to pressure.
Use the plunger method to get rid of metal dents. You can push the dent out by putting your hand over it. This method is helpful for removing creases on large trucks or cars with large hoods. They’re mostly made of rubber and are quickly popped out after being lowered onto flat surfaces like underframes, tow hooks, etc.
3. Try it with a Hammer
It’s often difficult to fix dents made on steel surfaces. There aren’t any specific tools to fix dents on steel surfaces. Instead, use a flat-ended rubber maul. It’s strong enough to fix small holes, but less likely to leave ugly marks. You can begin to repair the hole by wrapping one side of an old towel over something of metal, such as fencing or paneling. Put it on the spot that has been damaged to make sure it remains in place. Make sure to hammer away from below with all your weight, because we want to use the maximum force.
A wrong tool can cause more harm than good if you use it to make the purpose of making a scratch. To ensure that you don’t cause damage to nearby areas, use a suitable-sized Hammer. Also, take care not to smack into other parts during the project. These could result in unwanted scratches or dings.
For more information, click car dent repair